Ring Terminals

Non-
Insulated

Vinyl
Insulated

Nylon
Insulated

Mil-Spec
Nylon Ins.

The non-insulated terminals require only one crimp onto the wire.

The vinyl insulation prevents incidental metal to metal contact that can cause shorts. Requires only one crimp onto the wire.

The nylon insulation provides relief from vibration that can cause the wire to fail prematurely. The nylon insulation also prevents incidental metal to metal contact that can cause shorts. Requires two crimps (terminal to wire strands, terminal to insulation of wire). Standard tools perform both crimps. For heavier usage, use a tool that performs both crimps at the same time.

The Mil-Spec are rugged enough for the military, these terminals get the job done. Meets MIL-Spec MS/AS-25036.

Non-Insulated

Vinyl Insulated

Nylon Insulated

Stud Size Type Pkg. Qty.      Color Pkg. Qty.      Color Pkg. Qty.

26-24 Ga.

#2 Standard MB-R2 100 - - - - - - - - - - - - - - - - Yellow MN-R2 25
#4 Standard MB-R4 100 - - - - - - - - - - - - - - - - Yellow MN-R4 25
#6 Standard MB-R6 100 - - - - - - - - - - - - - - - - Yellow MN-R6 25
#8 Standard - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow MN-R8 25
#10 Standard - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow MN-R10 25

22-18 Ga.

#2 Standard AB-R2 100 - - - - - - - - - - - - - - - - Red AN-R2 50
#4 Standard AB-R4 100 Red AP-R4 100 Red AN-R4 50
#6 Standard AB-R6 100 Red AP-R6 100 Red AN-R6 50
#6 Narrow-Profile AB-R6S 100 Red AP-R6S 100 Red AN-R6S 50
#6 Short-Overall Length AB-R6SN 100 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#8 Standard AB-R8 100 Red AP-R8 100 Red AN-R8 50
#8 Narrow-Profile AB-R8S 100 - - - - - - - - - - - - - - - - Red AN-R8S 50
#10 Standard AB-R10 100 Red AP-R10 100 Red AN-R10 50
#10 Short-Overall Length AB-R10SN 100 - - - - - - - - - - - - - - - - Red AN-R10SN 50
1/4" Narrow-Profile AB-R14S 50 Red AP-R14S 100 Red AN-R14S 50
5/16"" Standard AB-R56 100 Red AP-R56 100 Red AN-R56 50
3/8" Standard AB-R38 100 Red AP-R38 100 Red AN-R38 50

16-14 Ga.

#4 Standard BB-R4 100 Blue BP-R4 100 Blue BN-R4 50
#6 Standard - - - - - - - - - - Blue BP-R6 100 Blue BN-R6 50
#6 Narrow-Profile BB-R6S 100 Blue BP-R6S 100 Blue BN-R6S 50
#6 Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Blue BN-R6S-MS 25
#8 Standard BB-R8 100 Blue BP-R8 100 Blue BN-R8 50
#8 Narrow-Profile BB-R8S 100 - - - - - - - - - - - - - - - - Blue BN-R8S 50
#8 Short-Overall Length BB-R8SN 100 - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50
#10 Standard BB-R10 100 Blue BP-R10 100 Blue BN-R10 50
#10 Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Blue BN-R10-MS 25
#6, #8, #10 Multi-Stud - - - - - - - - - - Blue BP-TD10 100 Blue BN-TD10 50
1/4" Narrow-Profile BB-R14S 100 Blue BP-R14S 100 Blue BN-R14S 50
1/4" Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Blue BN-R14-MS 10
5/16" Standard BB-R56 50 Blue BP-R56 100 Blue BN-R56 50
5/16" Narrow-Profile - - - - - - - - - - - - - - - - - - - - - - - - - - Blue BN-R56S 50
3/8" Standard BB-R38 50 Blue BP-R38 100 Blue BN-R38 50
1/2" Standard - - - - - - - - - - - - - - - - - - - - - - - - - - Blue BN-R12 25

12-10 Ga.

#4 Standard CB-R4 50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#6 Standard CB-R6 50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#6 Narrow-Profile CB-R6S 50 Yellow CP-R6S 50 Yellow CN-R6S 50
#8 Standard CB-R8 50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#8 Narrow-Profile CB-R8S 50 Yellow CP-R8S 50 Yellow CN-R8S 50
#10 Standard CB-R10 100 Yellow CP-R10 50 Yellow CN-R10 50
#10 Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow CN-R10-MS 10
#6, #8, #10 Multi-Stud - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow CN-TD10 50
1/4" Narrow-Profile CB-R14S 100 Yellow CP-R14S 50 Yellow CN-R14S 50
5/16" Standard CB-R56 100 Yellow CP-R56 50 Yellow CN-R56 50
5/16" Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow CN-R56-MS 10
3/8" Standard CB-R38 100 Yellow CP-R38 50 Yellow CN-R38 50
3/8" Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow CN-R38-MS 10
7/16" Standard - - - - - - - - - - - - - - - - - - - - - - - - - - Yellow CN-R76 50
1/2" Standard CB-R12 10 Yellow CP-R12 50 Yellow CN-R12 50
1/2" Mil-Spec - - - - - - - - - - - - - - - - - - - - - - Yellow CN-R12-MS 10
5/8" Standard CB-R58 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8 Ga.

#8 Standard DB-R8 25 Red DP-R8L 25 - - - - - - - - - - - - - - - -
#10 Narrow-Profile DB-R10S 25 Red DP-R10S 25 - - - - - - - - - - - - - - - -
1/4" Narrow-Profile DB-R14S 25 - - - - - - - - - - - - - - - - Red DN-R14S 25
5/16" Standard DB-R56 25 - - - - - - - - - - - - - - - - Red DN-R56 25
5/16" Nylon Mil-Spec - - - - - - - - - - - - - - - - - - - - - - - - - - Red DN-R56-MS 10
3/8" Standard DB-R38 25 Red DP-R38 25 - - - - - - - - - - - - - - - -
3/8" Long Length DB-R38L 25 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard DB-R12 25 Red DP-R12 25 - - - - - - - - - - - - - - - -
9/16" Standard DB-R96 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard DB-R58 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard DB-R34 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6 Ga.

#10 Narrow-Profile EB-R10S 10 - - - - - - - - - - - - - - - - Blue EN-R10S 10
1/4" Narrow-Profile EB-R14S 10 - - - - - - - - - - - - - - - - Blue EN-R14S 10
5/16" Standard EB-R56 10 Blue EP-R56 10 - - - - - - - - - - - - - - - -
3/8" Standard EB-R38 10 Blue EP-R38 10 - - - - - - - - - - - - - - - -
7/16" Standard EB-R76 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard EB-R12 10 Blue EP-R12 10 - - - - - - - - - - - - - - - -
9/16" Standard EB-R96 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard EB-R58 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard EB-R34 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

4 Ga.

#10 Standard FB-R10 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/4" Standard FB-R14 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/4" Narrow-Profile FB-R14S 10 Yellow FP-R14S 10 - - - - - - - - - - - - - - - -
5/16" Standard FB-R56 10 - - - - - - - - - - - - - - - - Yellow FN-R56 10
3/8" Standard FB-R38 10 - - - - - - - - - - - - - - - - Yellow FN-R38 10
7/16" Standard FB-R76 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard FB-R12 10 Yellow FP-R12 10 - - - - - - - - - - - - - - - -
9/16" Standard FB-R96 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard FB-R58 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard FB-R34 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2 Ga.

#10 Standard GB-R10 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/4" Standard GB-R14 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/16" Standard GB-R16 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/8" Standard GB-R38 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7/16" Standard GB-R76 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard GB-R12 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9/16" Standard GB-R96 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard GB-R58 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard GB-R34 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1/0 Ga.

1/4" Standard HB-R14 10 - - - - - - - - - - - - - - - - Yellow HN-R14 10
5/16" Standard HB-R56 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/8" Standard HB-R38 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7/16" Standard HB-R76 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard HB-R12 10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9/16" Standard HB-R96 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard HB-R58 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard HB-R34 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2/0 Ga.

1/4" Standard JB-R14 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/16" Standard JB-R56 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/8" Standard JB-R38 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7/16" Standard JB-R76 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard JB-R12 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9/16" Standard JB-R96 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard JB-R58 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard JB-R34 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3/0 Ga.

5/16" Standard KB-R56 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/8" Standard KB-R38 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7/16" Standard KB-R76 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard KB-R12 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9/16" Standard KB-R96 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard KB-R58 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard KB-R34 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

4/0 Ga.

5/16" Standard LB-R56 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/8" Standard LB-R38 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard LB-R12 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9/16" Standard LB-R96 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard LB-R58 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/4" Standard LB-R34 5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

250 MCM

5/16" Standard 2.5MCM-56 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3/8" Standard 2.5MCM-38 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard 2.5MCM-12 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5/8" Standard 2.5MCM-58 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

300 MCM

3/8" Standard 3MCM-38 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard 3MCM-12 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

400 MCM

1/2" Standard 4MCM-12 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

500 MCM

3/8" Standard 5MCM-38 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1/2" Standard 5MCM-12 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Heat-Shrink Ring Terminals

For use in harsh environments, these terminals feature a heat-shrink connection that also has an internal sealant. After crimping the terminal onto the wire, simply apply heat. Keeps moisture out while ensuring your wire does not pull out of the terminal.

A heavy duty heat-shrink jacket makes it difficult to cut into these heat-shrink terminals during the crimping process. If, in a rare instance, you do pierce the jacket, during the heat-shrink process, the jacket will heal itself and fill in the hole with sealant. These are the highest quality heat-shrink terminals available.

The solder heat-shrink terminals feature a heat-shrink connection that also has solder connection. By simply applying heat, you'll melt a small amount of solder that makes a perfect connection - no crimps required. Also keeps moisture out while ensuring your wire does not pull out of the terminal.

Standard

Heavy Duty

Solder

Stud Size Type Color Pkg. Qty.      Pkg. Qty.      Pkg. Qty.

26-24 Ga.

#6 Standard Yellow MS-R6 25 - - - - - - - - - - - - - - - - - - - -
#8 Standard Yellow MS-R8 25 - - - - - - - - - - - - - - - - - - - -
#10 Standard Yellow MS-R10 25 - - - - - - - - - - - - - - - - - - - -
1/4" Standard Yellow MS-R14 25 - - - - - - - - - - - - - - - - - - - -

22-18 Ga.

#6 Standard Red AS-R6 25 ASN-R6 10 ASS-R6 10
#8 Standard Red AS-R8 25 ASN-R8 10 ASS-R8 10
#10 Standard Red AS-R10 25 ASN-R10 10 ASS-R10 10
#6 , #8 , #10 Multi-Stud - - - - - - - - - - - - - - - - ASN-TD10 10 - - - - - - - - - -
1/4" Standard Red AS-R14 25 ASN-R14 10 ASS-R14 10
3/8" Standard Red AS-R38 25 ASN-R38 10 - - - - - - - - - -
5/16" Standard Red AS-R56 25 ASN-R56 10 - - - - - - - - - -

16-14 Ga.

#6 Standard Blue BS-R6 25 BSN-R6 10 - - - - - - - - - -
#8 Standard Blue BS-R8 25 BSN-R8 10 BSS-R8 10
#10 Standard Blue BS-R10 25 BSN-R10 10 BSS-R10 10
#6 , #8 , #10 Multi-Stud Blue - - - - - - 10 BSN-TD10 10 - - - - - - - - - -
1/4" Standard Blue BS-R14 25 BSN-R14 10 BSS-R14 10
3/8" Standard Blue BS-R38 25 BSN-R38 10 BSS-R38 10
5/16" Standard Blue BS-R56 25 BSN-R56 10 - - - - - - - - - -
1/2" Standard Blue BS-R12 25 BSN-R12 10 - - - - - - - - - -

12-10 Ga.

#6 Standard Yellow CS-R6 25 CSN-R6 10 - - - - - - - - - -
#8 Standard Yellow CS-R8 25 CSN-R8 10 - - - - - - - - - -
#10 Standard Yellow CS-R10 25 CSN-R10 10 CSS-R10 10
#6 , #8 , #10 Multi-Stud Yellow - - - - - - - - - - CSN-TD10 10 - - - - - - - - - -
1/4" Standard Yellow CS-R14 25 CSN-R14 10 CSS-R14 10
3/8" Standard Yellow CS-R38 25 CSN-R38 10 CSS-R38 10
5/16" Standard Yellow CS-R56 25 CSN-R56 10 CSS-R56 10
1/2" Standard Yellow CS-R12 10 CSN-R12 5 CSS-R12 10

8 Ga.

#10 Standard Red DS-R10 10 DSN-R10 10 - - - - - - - - - -
1/4" Standard Red DS-R14 10 DSN-R14 10 - - - - - - - - - -
3/8" Standard Red DS-R38 10 DSN-R38 10 - - - - - - - - - -
5/16" Standard Red DS-R56 10 DSN-R56 10 - - - - - - - - - -
1/2" Standard Red DS-R12 10 DSN-R12 5 - - - - - - - - - -
Heavy Duty Ring Terminals

These ring terminals are made from 0.050" thick copper, rather than the typical 0.032" thick stock. Provides durability and a longer life.

The nylon insulation provides relief from vibration that can cause the wire to fail prematurely. The nylon insulation also prevents incidental metal to metal contact that can cause shorts. Requires two crimps (terminal to wire strands, terminal to insulation of wire). Standard tools perform both crimps. For heavier usage, use a tool that performs both crimps at the same time.

Non- Insulated

Nylon-Insulated

Non-Insulated

Nylon Insulated

Stud Size Pkg. Qty Color Pkg. Qty.

16-12 Ga.

#6 BB-R6H 25 Yellow BN-R6H 50
#10 BB-R10H 25 Yellow BN-R10H 25
1/4" BB-R14H 25 Yellow BN-R14SH 25
5/16" BB-R56H 25 Yellow BN-R56H 25
3/8" BB-R38H 25 Yellow BN-R38H 25
1/2" BB-R12H 25 Yellow BN-R12H 10
High Temperature Ring Terminals
.

One piece steel construction and nickel plating provide reliable electrical connections at temperatures up to 900°F. Requires only one crimp onto the wire.

Stud Size Pkg. Qty.

22-18 Ga.

#6 AH-R6 50
#8 AH-R8 50
#10 AH-R10 50
1/4" AH-R14 50
5/16" AH-R56 50

16-14 Ga.

#6 BH-R6 50
#8 BH-R8 50
#10 BH-R10 50
1/4" BH-R14S 50
5/16" BH-R56 50
3/8" BH-R38 50

12-10 Ga.

#6 CH-R6 50
#8 CH-R8 50
#10 CH-R10 50
Stud Size Pkg. Qty.

12-10 Ga.

1/4" CH-R14S 25
5/16" CH-R56 25
3/8" CH-R38 25

8 Ga.

#10 DH-R10S 25
1/4" DH-R14S 25
5/16" DH-R56 25
3/8" DH-R38 25

6 Ga.

1/4" EH-R14 5
5/16" EH-R56 5
3/8" EH-R38 5

4 Ga.

1/4" FH-R14 5
3/8" FH-R38 5
Non-Insulated Flag Ring Terminals
.

Features a 90 degree orientation making the crimp more convenient and allows the ring terminal to be used in confined spaces. Requires only one crimp onto the wire.

Stud Size Pkg. Qty.

22-18 Ga.

#6 AB-R6F 100

16-14 Ga.

#6 BB-R6F 100
#8 BB-R8F 50
#10 BB-R10F 50

12-10 Ga.

#10 CB-R10F 25

8 Ga.

1/4" DB-R14F 10
5/16" DB-R56F 10
3/8" DB-R38F 10

6 Ga.

#10 EB-R10F 10
5/16" EB-R56F 10

4 Ga.

1/4" FB-R14F 5
5/16" FB-R56F 5
3/8" FB-R38F 5

2 Ga.

1/4" GB-R14F 5
5/16" GB-R56F 5
3/8" GB-R38F 5
Stud Size Pkg. Qty.

1/0 Ga.

1/4" HB-R14F 1
5/16" HB-R56F 1
3/8" HB-R38F 1
1/2" HB-R12F 1

2/0 Ga.

5/16" JB-R56F 1
3/8" JB-R38F 1
1/2" JB-R12F 1

3/0 Ga.

5/16" KB-R56F 1
3/8" KB-R38F 1
1/2" KB-R12F 1

4/0 Ga.

5/16" LB-R56F 1
3/8" LB-R38F 1
1/2" LB-R12F 1
3-Way & 4-Way Terminals

Quickly and securely connects multiple wires with one terminal. Constructed of three or four ring terminals riveted together through the stud holes.

The vinyl insulation prevents incidental metal to metal contact that can cause shorts. Requires one crimp per wire.

The nylon insulation provides relief from vibration that can cause the wire to fail prematurely. The nylon insulation also prevents incidental metal to metal contact that can cause shorts. Requires two crimps (terminal to wire strands, terminal to insulation of wire). Standard tools perform both crimps.

Use heat-shrink in harsh environments, these terminals feature a heat-shrink connection that also has an internal sealant. After crimping the terminal onto the wire, simply apply heat. Keeps moisture out while ensuring your wire does not pull out of the terminal.

A heavy duty heat-shrink jacket makes it very difficult to cut into these heat-shrink terminals during the crimping process, a common problem with basic heat-shrink terminals. If, in a rare instance, you do pierce the jacket, during the heat-shrink process the jacket will heal itself and fill in the hole with sealant. This is the highest quality line of heat-shrink terminals available.


3-Way Terminals

                   

Non-Insulated

    

Vinyl Insulated

    

Nylon Insulated

    

Heat-Shrink

    

Heavy Duty Heat-Shrink

Wire Size (AWG) Pkg. Qty. Color Pkg. Qty. Pkg. Qty. Pkg. Qty. Pkg. Qty.
22-18 - - - - - - - - Red AP-Y 25 AN-Y 25 AS-Y 5 ASN-Y 10
16-14 BB-Y 10 Blue BP-Y 25 BN-Y 10 BS-Y 5 BSN-Y 10
12-10 CB-Y 10 Yellow CP-Y 25 CN-Y 10 CS-Y 5 CSN-Y 10

4-Way Terminals

         

Non-Insulated

    

Vinyl Insulated

    

Nylon Insulated

    

Heat-Shrink

    

Heavy Duty Heat-Shrink

Wire Size (AWG) Pkg. Qty. Color Pkg. Qty. Pkg. Qty. Pkg. Qty. Pkg. Qty.
22-18 - - - - - - - - Red AP-X 10 AN-X 10 AS-X 25 - - - - - - -
16-14 - - - - - - - Blue BP-X 10 BN-X 10 BS-X 5 BSN-X 10
12-10 - - - - - - - Yellow CP-X 10 CN-X 10 CS-X 5 CSN-X 1