| MISCELLANEOUS |
| TAPE |
|
| ELECTRICAL TAPE |
|
 |
 |
 |
| |
PART #
ET-66UL |
PART #
ST-33 |
PART #
ST-88 |
UL Approved,
7 Mil,
All Weather,
3/4" x 66',
Flame Retardant
(Avail. In White) |
UL,
3/4" x 66',
7 Mil |
UL,
3/4" x 66',
8.5 Mil,
Extra Flexible |
|
|
|
 |
 |
| |
PART #
ST-35 |
PART #
1700-TAPE |
Tape For Color Coding,
Available In Red, Green,
Brown, Blue, White,
Yellow, Gray And Orange |
General Purpose Vinyl,
Economical, Flexible,
7 Mil, UL Approved |
|
| |
| DUCT TAPE |
 |
2" x 60yd, Silver Industrial Grade,
11 Mil, Very Sticky Adhesive,
Good Tensile And Handling Characteristics |
 |
1.88" x 60'
Transparent when Applied,
Lasts 6 Times Longer Than Regular Duct Tape, Water & UV Resistant,
Sticks to: Wood, Glass, Metal, Vinyl & Rubber,
Great for Patching, Sealing and Repairing Indoors or Outdoors |
PART #
DT-60 |
PART #
DT-CLEAR |
|
|
| |
| COLD SHRINK TAPE |
 |
1" x 10', 132kv, 130°C, Ethylene Propylene Rubber.
A Positive Sealing Cold Shrink Tape That Requires
NO Heat And Can Be Applied In Any Weather Condition.
Insultates And Bundles, Ideal For Underground Applications.
Set In Seconds - Cures In Hours. |
 |
1" x 10' x 20 Mil. Thick,
Bonds to Itself, No Adhesive, Special Silicone Wrap That Adheares to Itself Under Tension, Extreme Temperatures 500°F to -60°F, Rated 8,000 Volts and 600 PSI, Stretches 3x its length and Covers Any Irregular Shape When Applied, Forms a Permanent Air and Water Seal, Apply Anywhere the Conditions Are Extreme and a Seal is Needed |
PART #
S-TAPE |
PART #
XS-TAPE |
|
|
| |
| TEFLON TAPE |
 |
1/2" x 520", White,
Plastic Spool With Shell, Pipe Thread Tape,
Leak Proof Joints, Mil Spec Approved |
|
3/4" x 520", White,
Plastic Spool With Shell, Pipe Thread Tape,
Leak Proof Joints, Mil Spec Approved |
PART #
TEF-520 |
PART #
TEF-520-3/4" |
|
|
| |
| RUBBER SPLICING TAPE |
 |
 |
| |
|
PART # |
SIZE |
|
130C |
3/4" x 30',30 Mil |
|
130C-1 |
1" x 30',30 Mil |
|
PART #
23130 |
Comfortable Rubber/Linerless,
High Voltage Insulating Tape |
1" x 30, 30 Mil,
Comfortable, Self Fusing Rubber Based,
High And Low Voltage Insulating |
|
|
|
| CAMBRIC TAPE |
|
 |
| |
PART #
VCT-1X108 |
PART #
2520-TAPE |
1" x 36yd, Yellow,
Varnish Coated Cotton Cloth - No Adhesive,
7 Mil, 220°F |
3/4" x 60, 8 Mil,
Adhesive Lined, Yellow,
Varnish Coated Cloth, 220deg;F |
|
|
| |
| FRICTION TAPE |
 |
3/4" x 60', Cloth Construction,
Good Mechanical Protection Against Abrasion,
Penetration Of Cables, Splices, And Wire,
1500 Volt Dielectric Strength |
PART #
F-TAPE |
|
|
| |
| GLASS CLOTH TAPE |
 |
 |
 |
| |
PART #
ET-2712 |
PART #
ST-2734 |
PART #
69-TAPE |
1/2" x 66', 7 Mil, 266°F,
Woven Glass Cloth,
High Temperature & Mechanical Strength,
Adhesive Lined |
3/4" x 66', 7 Mil, 266°F,
Woven Glass Cloth,
High Temperature & Mechanical Strength,
Adhesive Lined |
1/2" x 66', 7 Mil, 356°F,
Woven Glass Cloth,
High Temperature & Mechanical Strength,
Adhesive Lined |
|
|
| |
| CORROSION PROTECTION TAPES |
 |
 |
| |
PART #
50-TAPE |
PART #
SCTCH INS PUTTY |
2" x 100', 10 Mil, 176°F,
Tough PVC With High-Tack Adhesives,
Resists Corrosion Of Metal Piping, Resistant To Impact,
Abrasion And Punctures |
1 1/2" x 60', 125 Mil, 176°F,
Soft And Pliable, Use As Build-Up Compound On
Irregular Surfaces To Provide
A Smooth, Waterproof Taping Surface |
|
|
| |
| SEALING AND INSULATING TAPES |
 |
 |
| |
PART #
6147 |
PART #
2200 Mastic Pads |
2 1/2" x 10', 45 Mil, 600 Volts, Self-Fusing,
Rubber Based Thin Mastic Laminated To PVC Backing,
Excellant Mosture Sealant, Tough |
6 1/2" x 4 1/2" Pads, 10 To Box, 125 Mil, 176°F,
Rubber/PVC, All Weather, Resistant To Abrasion,
Alkalies, Acids, UV And Moisture |
|
|
| |
| LIQUID TAPE AND COATINGS |
 |
 |
| |
PART #
L-TAPE |
PART #
SCOTCH KOTE |
4oz Can With Brush In Top,
Brush On Electrical Tape,
Protects, Water Proofs And Seals |
15oz Can With Brush Top, Flexible Fast Drying Sealant
And Bonding Compound |
|
|
|
| DIELECTRIC GREASE |
 |
 |
PART #
GR-99170
|
PART # |
|
TL-97944 |
2oz Tube |
TL-97940 |
8oz Can |
TL-97948 |
14oz Cartridge |
|
Corrosion & Rust Preventive Sealant,
4oz Tube, Great Adhesion and
Resistance to Washout,
-40°F - 302°F |
Corrosion Preventive Compound,
For Electrical Contacts, Switches & Junction Boxes |
|
|
|
| SPRAY CLEANERS |
 |
 |
PART #
3M-CONTACT |
PART #
3M-DEGREASER |
Contact Cleaner, 11oz Spray Can,
Removes Oils, Light Grease, Particulates, Silicones,
Fast Drying & Non-Corrosive, Non-Flammable,
Safe for Plastics and Metals,
Low in Toxicity, No HFCs, Odorless,
Safe for Electrical Components & Live Circuits |
Electronic Degreaser, 12oz Spray Can,
Industrial Strength Cleaner, Removes Oils,
Silicones, Grease and Light Soiling,
Fast Drying, Non-Corrosive & Non-Flammable,
Safe for Most Metal & Most Plastics
(Except Acrylics,
Polycarbonates, ABS & PS)
Low Toxicity; Odorless, No HCFCs, HFCs, nPB or HAPs |
|
|
|
ADHESIVE/SEALANTS
ECLECTIC PRODUCTS |
E-6000 Has Very High Tensile Strength, Extremely Flexible,
Bonds Difficult Porous And Non-Porous Surfaces,
Can Be Applied To Oil & Water Based Painted Surfaces Or Can Be Painted Over,
Non-Corrosive, Sheer Strength 200PSI,
Stretches to 900% of length, -40°F To 150°F |
|
|
|
| PART # |
TUBE/CARTRIDGE |
SIZE |
VISCOSITY |
DESCRIPTION |
| E-6000T CLEAR |
TUBE |
3.7oz |
HIGH |
CLEAR |
| E-6000C |
CARTRIDGE |
10.2oz |
HIGH |
CLEAR |
| E-6000-BK |
TUBE |
3.7oz |
MEDIUM |
BLACK |
| E-6000-GY |
TUBE |
3.7oz |
MEDIUM |
GRAY |
| UV-6800T |
TUBE |
3.7oz |
MEDIUM |
CLEAR UV RESISTANT |
|
|
